Magnetic heat conductivity in CaCu2O3\rm\bf CaCu_2O_3: linear temperature dependence

We present experimental results for the thermal conductivity $\kappa$ of the pseudo 2-leg ladder material $\rm CaCu_2O_3$. The strong buckling of the ladder rungs renders this material a good approximation to a $S=1/2$ Heisenberg-chain. Despite a strong suppression of the thermal conductivity of this material in all crystal directions due to inherent disorder, we find a dominant magnetic contribution $\kappa_\mathrm{mag}$ along the chain direction. $\kappa_\mathrm{mag}$ is \textit{linear} in temperature, resembling the low-temperature limit of the thermal Drude weight $D_\mathrm{th}$ of the $S=1/2$ Heisenberg chain. The comparison of $\kappa_\mathrm{mag}$ and $D_\mathrm{th}$ yields a magnetic mean free path of $l_\mathrm{mag}\approx 22 \pm 5$ \AA, in good agreement with magnetic measurements.Comment: appears in PR

Role of disorder when upscaling magnetocaloric Ni-Co-Mn-Al Heusler alloys from thin films to ribbons

Research in functional magnetic materials often employs thin films as model systems for finding new chemical compositions with promising properties. However, the scale-up of thin films towards bulk-like structures is challenging, since the material synthesis conditions are entirely different for thin films and e.g. rapid quenching methods. As one of the consequences, the type and degree of order in thin films and melt-spun ribbons are usually different, leading to different magnetic properties. In this work, using the example of magnetocaloric Ni-Co-Mn-Al melt-spun ribbons and thin films, we show that the excellent functional properties of the films can be reproduced also in ribbons, if an appropriate heat treatment is applied, that installs the right degree of order in the ribbons. We show that some chemical disorder is needed to get a pronounced and sharp martensitic transition. Increasing the order with annealing improves the magnetic properties only up to a point where selected types of disorder survive, which in turn compromise the magnetic properties. These findings allow us to understand the impact of the type and degree of disorder on the functional properties, paving the way for a faster transfer of combinatorial thin film research towards bulk-like materials for magnetic Heusler alloys

МЕХАНИЗМ РОСТА ТРЕЩИНЫ В ДЕНТИНЕ ЧЕЛОВЕКА ПРИ СЖАТИИ

Работа выполнена при поддержке РФФИ №20-48-660017 р_а

Predicting the dominating factors during heat transfer in magnetocaloric composite wires

Magnetocaloric composite wires have been studied by pulsed-field measurements up to μ0ΔH = 10 T with a typical rise time of 13 ms in order to evaluate the evolution of the adiabatic temperature change of the core, ΔTad, and to determine the effective temperature change at the surrounding steel jacket, ΔTeff, during the field pulse. An inverse thermal hysteresis is observed for ΔTad due to the delayed thermal transfer. By numerical simulations of application-relevant sinusoidal magnetic field profiles, it can be stated that for field-frequencies of up to two field cycles per second heat can be efficiently transferred from the core to the outside of the jacket. In addition, intense numerical simulations of the temperature change of the core and jacket were performed by varying different parameters, such as frequency, heat capacity, thermal conductivity and interface resistance in order to shed light on their impact on ΔTeff at the outside of the jacket in comparison to ΔTad provided by the core

The impact of surface morphology on the magnetovolume transition in magnetocaloric LaFe11.8Si1.2

Home > Publishers > AIP Publishing > APL Materials > Volume 4 Number 10 > Article banner image OA The impact of surface morphology on the magnetovolume transition in magnetocaloric LaFe11.8Si1.2 A. Waske1,2,a), E. Lovell3, A. Funk1,2, K. Sellschopp1,2, A. Rack4, L. Giebeler1, P. F. Gostin1,b), S. Fähler1 and L. F. Cohen3 + VIEW AFFILIATIONS a) Author to whom correspondence should be addressed. Electronic mail: [email protected] b) Current address: School of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham B15 2TT, United Kingdom. APL Mater. 4, 106101 (2016); http://dx.doi.org/10.1063/1.4963840 Download PDF PREVIOUS ARTICLE TABLE OF CONTENTSNEXT ARTICLE facebook twitter Share this page separator email print this page Abstract Full Text References (19) Cited By (1) Data & Media Metrics Related First order magnetocaloric materials reach high entropy changes but at the same time exhibit hysteresis losses which depend on the sample’s microstructure. We use non-destructive 3D X-ray microtomography to understand the role of surface morphology for the magnetovolume transition of LaFe11.8Si1.2. The technique provides unique information on the spatial distribution of the volume change at the transition and its relationship with the surface morphology. Complementary Hall probe imaging confirms that on a morphologically complex surface minimization of strain energy dominates. Our findings sketch the way for a tailored surface morphology with low hysteresis without changing the underlying phase transition

Searching for biological feedstock material: 3D printing of wood particles from house borer and drywood termite frass

Frass (fine powdery refuse or fragile perforated wood produced by the activity of boring insects) of larvae of the European house borer (EHB) and of drywood termites was tested as a natural and novel feedstock for 3D-printing of wood-based materials. Small particles produced by the drywood termite Incisitermes marginipennis and the EHB Hylotrupes bajulus during feeding in construction timber, were used. Frass is a powdery material of particularly consistent quality that is essentially biologically processed wood mixed with debris of wood and faeces. The filigree-like particles flow easily permitting the build-up of wood-based structures in a layer wise fashion using the Binder Jetting printing process. The quality of powders produced by different insect species was compared along with the processing steps and properties of the printed parts. Drywood termite frass with a Hausner Ratio HR = 1.1 with ρBulk = 0.67 g/cm3 and ρTap = 0.74 g/cm3 was perfectly suited to deposition of uniformly packed layers in 3D printing. We suggest that a variety of naturally available feedstocks could be used in environmentally responsible approaches to scientific material sciences/additive manufacturing

Neutron diffraction study of the inverse spinels Co2TiO4 and Co2SnO4

We report a detailed single crystal and powder neutron diffraction study of Co2TiO4 and Co2SnO4 between the temperature 1.6 and 80K to probe the spin structure in the ground state. For both compounds the strongest magnetic intensity was observed for the 111 M reflection due to ferrimagnetic ordering, which sets in below TN 48.6 and 41 K for Co2TiO4 and Co2SnO4, respectively. An additional low intensity magnetic reflection 200 M was noticed in Co2TiO4 due to the presence of an additional weak antiferromagnetic component. Interestingly, from both the powder and single crystal neutron data of Co2TiO4, we noticed a significant broadening of the magnetic 111 M reflection, which possibly results from the disordered character of the Ti and Co atoms on the B site. Practically, the same peak broadening was found for the neutron powder data of Co2SnO4. On the other hand, from our single crystal neutron diffraction data of Co2TiO4, we found a spontaneous increase of particular nuclear Bragg reflections below the magnetic ordering temperature. Our data analysis showed that this unusual effect can be ascribed to the presence of anisotropic extinction, which is associated to a change of the mosaicity of the crystal. In this case, it can be expected that competing Jahn Teller effects acting along different crystallographic axes can induce anisotropic local strain. In fact, for both ions Ti3 and Co3 , the 2tg levels split into a lower dxy level yielding a higher twofold degenerate dxz dyz level. As a consequence, one can expect a tetragonal distortion in Co2TiO4 with c a lt; 1, which we could not significantly detect in the present wor